15kv Porcelain Pin Insulator ANSI 55

About the Porcelain pin type Insulator  As the name suggests, the pin type insulator is mounted on a pin on the cross-arm on the pole. There is a groove on the upper 

Featured Products

About the Porcelain pin type Insulator
  As the name suggests, the pin type insulator is mounted on a pin on the cross-arm on the pole. There is a groove on the upper end of the insulator. The conductor passes through this groove and is tied to the insulator with annealed wire of the same material as the conductor. Pin type insulators are used for transmission and distribution of electric power at voltages up to 33 kV. Beyond operating voltage of 33 kV, the pin type insulators become too bulky and hence uneconomical.
 Advantages of Porcelain pin type Insulator
High reliability through accumulated technology
Excellent long-term performance

15kv Porcelain Pin Insulator ANSI 55
15kv Porcelain Pin Insulator ANSI 55


Basic Data
 
ANSI Class55-155-255-355-455-5
Creepage Distance, mm102127178229305
Dry Arcing Distance, mm5786114127159
Main. Pin Length, mm102102127127152
Cantilever Strength, kN1311111313
Low Frequency Flashover Voltage
 
Dry, KV3545556580
Wet, KV2025303545
Critical Impulse Flashover Voltage
 
Pos, KV507090105130
Neg,KV7085110130150
Low Frequency Puncture Volatage, kV50709095115
Radio Influence Voltage Data
 
Test Voltage to Ground, kV55101015
Max RIV at 1000 KHz, uV50505050100
Net Weight, Each, Approx, kg0.50.6511.652.75
Service
Choose our products! You'll get
1) Good quality guarantee (2 years)
2) Factory direct prices
3) On time delivery
4) Free sample
5) Professional technology support
 
Strict quality controls have been taken to ensure that you'll get reliable products.
a. Material checks before production .
b. Random inspection during production .
c. Inspection before the shipment.

Our products fully comply with well recognized standards such as IEC, BS, ANSI.
15kv Porcelain Pin Insulator ANSI 55FAQ:
1. Q: Do you have a catalog? Can you send me the catalog to have a check of all your products?
A: Yes, We have product catalog. Please contact us, we'll send our catalog by E-mail.

2 Q: I can't find the product on your catalog, can you make this product for me?
A: Our catalog shows most of our products but not all. If you couldn't find it, let us know the specification of your requirements, it usually takes 20-30 days for us to design and make new moulds which match your requirements.
 
3 Q: What's your payment term?
A: The price FOB Ningbo under payment term is 50% T/T in advance and the balance before shipment.
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours